MMF POS VESA WALL MOUNT, RIGHT ANGLE , TILT & SWIVEL WITH 4 ARM 75/100mm KIT - Manual

Thumb
Screws
Cable
Management Hole
To Wall
SPECS
Rotation: 180⁰
Overall Height: 11.5” from base to top
Tilt Adjustment (without LCD): Up to 45⁰ Tilt
Pole Diameter: 2”
Base Dimensions: 5” x 5”
Maximum Load: Designed for LCD Monitors / touch-screens weighting up
to 30 lbs (13.60kg) . Max Weight is dependant on anchoring system.
Display: Designed for VESA 75mm or 100mm mounting standard
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient
cable access and routing.
Color: Black
Right Angle VESA Wall Mount (P/N: 225-76142-04)
Quick Installation Instructions
INSTALLATION
1. Remove Right Angle VESA Wall Mount from packaging box.
Remove the one screw holding Cable Cover Plate in place on top
base of Right Angle Mount. Hold on to the screw for later
installation in Step 5.
2. Firmly secure the base of the mount by bolting four (4) screws
through the base plate to a flat wall surface. Ensure the mount is
firmly anchored to wall. (Screws are not included as they need to
suit the specific wall type) .
3. Secure the VESA compatible mounting plate to the back of the flat
screen monitor (LCD) by placing four (4) screws on the
corresponding VESA mounting dimension (75mm or 100 mm).
NOTE: Screws are usually attached to LCD
4. Secure the mount’s tilt adjustment by tightening the two side thumb
screws on the VESA mounting plate on each side of the mount.
5. Guide cable connections down and out through the bottom
opening, if needed. If routing cable through wall, a cover has been
provided for a clean look. Replace the Cable Cover Plate with the
one (1) screw provided.
For parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfpos.com
VESA Right Angle WALL MOUNT Inst . Sheet (8-1-2011)
COPYRIGHT BY MMF POS
WHEELING, IL
TOOLS AND HARDWARE REQUIRED
• NO hardware or tools are included for mounting to
a surface. Hardware will need to suit your specific
wall type and thickness.
• Phillips Head Screwdriver or power drill will be
required to mount stand to wall .
Basic Overview
Note: Images are not to scale.
Right Angle VESA Wall Mount
P/N:225-76142-04
R
ep
la
cemen
t
P
a
rt
s
Thumb Screw
P/N: 225-76140-04
75mm & 100mm
VESA Mounting
Pattern
Cable
Cover
Cable
Cover
Plate
Cable
Management Hole
Side View Back View
Screw