MOTA Battery Case for iPhone 4/4S - Manual

Press ON/OFF button (hold for 3 seconds) to
charge your iPhone.
Turning the battery case off when iPhone is fully
charged will significantly save the charging
capacity. Press ON/OFF (hold for 3 seconds) to
power off the battery case.
When your MOTA battery case’s energy is fully
drained, iPhone will show a non-charging battery icon.
The battery case includes a USB cable. Use the
provided USB cable to charge your battery case.
Battery Case for iPhone 4/4S
Specification / User Manual
AP4-15
1450mAh
Features:
Matching iPhone 4 / 4S design. Thin and Stylish.
Capacity: 1450mAh (Li-Po) built in battery. Nearly doubles the
life of your iPhone.
Open slots for all iPhone 4/4S features. Use your phone
without removing the case.
Strong and Durable Material protect your iPhone from
scratches and drops.
Protective IC Circuit efficiently protects your iPhone against
short circuits, over-charging, and malfunction.
Changeable frames allow you to change the look of your
case.
iPhone® is a registered trademark of Apple® Inc.
Mota® is not affiliated to Apple® Inc.
MOTA® is a trademark of UNorth® LLC.
Copyright © 2013 by UNorth, LLC. All Rights Reserved.
www.MOTA.com
Warning:
To maximize the life of your iPhone battery case,
please fully charge the battery case before first use.
Be cautious of excessive drops, abrasions, or other
impacts to the battery case. Immediately stop using if
any abnormal indications appear.
Do not expose the battery case to wet or damp
conditions.
Do not use near heat emitting appliances.
Using USB cables than the one provided may result in
compatibility issues.
Do not attempt to replace any spare parts of the pack.
It is normal for the battery case to get slightly warm
when charging.
To dispose, take the battery case to your local battery
recycling center.
MOTA® is a trademark of UNorth® LLC.
Copyright © 2013 by UNorth, LLC. All Rights Reserved.
www.MOTA.com
Product Specifications: Notes: Illustration: Package Contents:
LED Indicators: Installing:
Slide your iPhone into the back cover of your MOTA battery
case, then install the frame from top to bottom.
Uninstalling:
Gently pull the bottom of the frame up by your fingernails.
Slide the iPhone out.