MOTA Battery Case for iPhone5/5s User Manual

MOTA Power suppliers

Advertising
background image

It is recommended to use the included USB Cable to charge the
power pack, other cable may result in compatibility issues.

Be cautious of excessive drops, abrasions, or other impacts to
the power pack. Please stop using immediately if any abnormal
events occur.

It is normal for the power pack to become warm when charging
due to high output.

Do not connect the power pack to iPhone if it has not been
used or charged for a long time.

iPhone® is a registered trademark of Apple® Inc.

Mota® is not affiliated to Apple® Inc.

MOTA® is a trademark of UNorth® LLC.

Copyright © 2013 by UNorth, LLC. All Rights Reserved.

www.MOTA.com

Protective IC Circuit efficiently prevents short-circuits,
over-charges, and malfunctions.

Built-in Li-polymer battery with 2000 mAh capacity nearly
doubles the battery life time of your iPhone 5.

Press and hold the on/off button on the MOTA Battery Case for
3 seconds to charge your iPhone.

Turning the battery case off when iPhone is fully charged will
significantly save the charging capacity. Press ON/OFF (hold for 3
seconds) to power off the battery case.

Connect the provided Micro USB charging cable to any USB
power source such as a computer to beging charging.

Charge the battery case until battery lights at the bottom of the
case indicate full.

To charge both your MOTA Battery Case and your iPhone 5,
and sync with iTunes (optional), insert your iPhone 5 into the
battery case and connect to computer using the provided
charging cable.

Tip:

Advertising