MotorGuide Bounce Buster - Manual

BounceBuster Original (MGA053B6)
Fits 20 and 23 Original Gator Mounts
BounceBuster II (MGA097B6)
Fits 21 and 24 Gator Spring Mounts
Bounce Buster III (MGB01102)
Fits 20.5 and 23.5 Gator Breakaway Mounts
The BounceBuster Protects Stowed Trolling Motor, Mount, and Boat during high-speed or rough-water
running.
Designed for Tournaments and Rough Water Use
Minimizes Damaging G-Forces
Lengthens Life of Motor and Mount Protects Boat From Damage
BounceBuster Original (Gator 20/23 Mount)
Fits Gator Mount –MST920BF, MST920SW
©2005, MotorGuide 90-MM6421
www.motorguide.com
BounceBuster II (Gator Spring/Spring XL Mount 21 and 24)
Fits Spring/Spring XL Mount –MST921BF, MST924BF
BounceBuster III (Gator Breakaway)
Fits Breakaway Mount MST920.5BF, MST923.5BF, MST920.5SW, MST923.5SW
DANGER:
Spring Tension must be relieved before servicing this mount. Failure to relieve the spring tension can result in severe
personal injury.
! WARNING
DANGER:
To avoid arm assembly from springing upward, possibly causing personal injury, use one hand or have an assistant
apply downward pressure on top of the arm assembly when pulling the rope to unlock the bow arm.
! WARNING
DANGER:
To avoid personal injury, keep your hands and fingers away from the area between the bow arm and deck channel.
! WARNING