Noctua NT-H1 - Manual

Clean off any residual
traces of thermal paste
on the CPU.
Press a small drop
(4-5mm diameter) of
NT-H1 onto the centre
of the heat-spreader.
Put the heatsink onto
the CPU, turn it back
and forth a few times
in order to spread
the paste and then
fasten it.
Done!
www.noctua.at
Noctua NT-H1 Thermal Paste
Usage instructions
WARNING
• Do not ingest. Seek
medical advice imme-
diately if ingested.
• Keep away from children
and pets.
• Avoid skin or eye contact.