Omnitron Systems Technology iConverter 2GXM - Manual (Page 27)

4.3 PORT CONFIGURATION
The Port configuration screen provides access to the port level configuration parameters, such as, Port
Access, SFP information, 802.3ah, Port VLANs, Tagged VLANs and cNode Loopback. To access the Port
configuration screen, select C from the Module configuration screen and press <ENTER>. The Port
configuration screen will appear.
PI
Module - iConverter 2GXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Port VLAN Path Setup
Slot Number = 11 ----------------------------------
Model Number = 8999-0 11: Port1 to Port2 Enable On
12: Port1 to BP A Enable On
Port Access Control Setup 13: Port1 to BP B Enable On
---------------------------------- 14: Port2 to BP A Enable On
1: Fiber Enable On 15: Port2 to BP B Enable On
2: UTP Enable On 16: BP A to BP B Enable On
17: Port1 to Mngmnt Enable On
Enhanced Features 18: Port2 to Mngmnt Enable On
---------------------------------- 19: BP A to Mngmnt Enable On
3: 802.1Q Processing Enable Off 20: BP B to Mngmnt Enable On
4: Configure Tag VLAN Control
5: Configure VLAN Membership
6: Save TAG VLAN parameters
7: Configure 802.3ah parameters
8: Configure 802.3ah events
9: SFP Information
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
SA
Module - iConverter 2GXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Port VLAN Path Setup
Slot Number = 11 ----------------------------------
Model Number = 8999-0 11: Port1 to Port2 Enable On
12: Port1 to Mngmnt Enable On
Port Access Control Setup 13: Port2 to Mngmnt Enable On
----------------------------------
1: Port 1 Enable On
2: Port 2 Enable On
Enhanced Features
----------------------------------
3: 802.1Q Processing Enable Off
4: Configure Tag VLAN Control
5: Configure VLAN Membership
6: Save TAG VLAN parameters
7: Configure 802.3ah parameters
8: Configure 802.3ah events
9: SFP Information
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 27