Opticon CRD 15 - Manual

The communications with PC are optionally done via USB connections.
Installing PDT into Cradle
CAUTION:
!
1.The Cradle can be used on horizontal surface only; it can't be used for wall mount.
2.This Cradle is not designed for use in a vehicle.
Charging Spare Battery Pack Note:
1. Both the PDT internal battery and a spare battery pack can be charged simultaneously
2. The charging LED indicator will show the charging status of the spare battery pack.
3. .
To ensure proper operation of the PDT in the cradle, hold it at a forward angle
while inserting, and then tilt it backwards into the resting position, as shown in
the picture.
CRD-15
Cradle
Installation
Guide
CRD-15
Cradle
Installation
Guide
4615-810002-01 / 20080502
Power Jack
USB Client
Spare
Battery
Pack
PDT
1
2