Opticon PHL 7000 Single Dock Installation Guide - Manual

The Single Dock with battery charging for Portable Data Terminal (PDT).
The communications with PC are optionally done via RS232 or USB connections.
A USB-host port provides connections with other USB devices.
Installing PDT to Single Dock
CAUTION:
!
1.The Single Dock can be used on horizontal surface only;
it can't be used for wall mount.
2.Use Only the Single Dock adapter (5Vdc/6.5A)for
DC power input and the PDT adapter (5Vdc/2.6A)
can not use in the Single Dock.
Charging Spare Battery Pack Note:
1.Both PDT internal battery and spare battery pack
can be charged simultaneously.
2.The charging LED indicator will show the charging
status of spare battery pack.
Red: Charging
Green: Fully charged
Spare
Battery
Pack
Charging LED
Power Jack
USB Client
USB Host
RS 232
PDT
Single
Dock
Installation
Guide