Oxygenics SkinCare Fixed With Comfort Control - Manual

STOP!
Need HelP?
PleaSe dO NOT reTurN THiS
PrOducT TO THe STOre.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or
1.775.420.5600
Support is also available via email at
[email protected]
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST
eaSy iNSTallaTiON
iNSTrucTiONS
STeP 3
Wrap plumber’s tape
clockwise 3 or 4 turns
around threaded end of
shower arm.
STeP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STeP 4
In a clockwise direction,
screw your new shower
head onto the taped
portion of the shower arm.
Hand tighten only.
STeP 2
Remove any remnants of
old plumber’s tape and
flush out shower pipe for
5 to 10 seconds.
WHaT’S iNcluded
+
Fixed Shower Head
+ Plumber’s Tape
uSiNG THe cOMFOrT
cONTrOl
Located at the top of the SkinCare® shower
head, the comfort control regulator allows
you to adjust from a gentle stream to an
invigorating spray.
Note: The comfort control regulator is not
a shut off valve. When turned to the lowest
position, the shower head continues to flow.
This is a normal safety
feature. Unit may be
in lowest flow (gentle
stream) position
d u r i n g s h i p p i n g .
Please check the position
of comfort control regulator
upon installation.
S
kin
C
are