Brother 8910DW User Manual
Page 6
3
Configuration for LDAP using a Web Browser
2
h
Make sure the machine is turned on and then choose Advanced Setting on the Protocol page. You
can configure and change the following LDAP settings using a web browser.
1 This is the location of your LDAP server.
2 Change the port if necessary. (389 is the typical port number of LDAP).
If you want to connect to the Global Catalog, enter the port number 3268.
3 Enter Search Root. This is the place to start a search. For example; if the domain name of the Active
Directory server is set to “local.example.com”, the Search Root could be such as “cn=Users, dc=local,
dc=example, dc=com”.
If your server supports LDAPv3, you can automatically obtain the Search Root by pressing
Fetch DNs.
4 Select Simple method in the Authentication section, and specify Username
. In
the case of connecting to the Active Directory server, enter the DN (Distinguished Name) format. (e.g.
“cn=username, cn=Users, dc=local, dc=example, dc=com ”)
5 This is how many seconds the machine will wait for a response from the LDAP server.
6 Enter the attribute type for name, E-mail address and fax number as used on the LDAP server.
1
This selection will only be available depending on the authentication method used.
1
2
3
4
5
6