Brother 8910DW - Manual (Page 7)

4
Configuration for LDAP using a Web Browser
2
i
After you have configured the LDAP settings, click Submit. Make sure that the Status is OK on the Test
Result page.
Note
• The LDAP function of this machine supports LDAPv3.
• You need to use Kerberos Authentication or Simple Authentication to communicate with your LDAP
server.
If the LDAP server supports Kerberos Authentication, we recommend to choose Kerberos for the
Authentication setting. It provides strong authentication between the LDAP server and your machine.
You must configure the protocol (network time server), or you must set the date, time and time zone
correctly on the control panel for Kerberos Authentication. The time must match the time on the server
used for the Kerberos Authentication. (For information about setting, see Synchronize with SNTP server
uu
page 8.)
• SSL/TLS is not supported.
• For the details of each item, see the Help Text in the Web Based Management.