Setup internet (mfc-8860dn only), Smtp server address, Pop3 server address – Brother DCP 8065DN User Manual
Page 32: Smtp server address pop3 server address
Control Panel Setup
20
3
Setup Internet (MFC-8860DN only)
This menu has five selections: Mail Address, SMTP Server, POP3 Server, Mailbox Name and Mailbox
Pwd. As this section requires you to enter a lot of text characters, you may find that it is more convenient to
use your favorite web browser to configure these settings. (See
Web Based Management on page 53. For
more details about Internet Fax, see
Internet Fax (MFC-8860DN only) on page 59.)
Note
If you want to use the E-mail notification function, see
Using E-mail notification with user authentication on
Mail Address
1
Press Menu, 6, 3, 1, 1.
2
Select
1
to change. Enter the mail address. Press OK.
3
Press Stop/Exit.
Entering text
You can access the character you want by repeatedly pressing the appropriate number key. For more
information, see
SMTP Server address
This field displays the Node Name or IP address of an SMTP mail server (outgoing E-mail Server) on your
network.
(Ex, mailhost.brothermail.net -or- 192.000.000.001)
1
Press Menu, 6, 3, 1, 2.
2
Press
▲ or ▼ to select Name or IP Address.
3
Enter the SMTP SERVER Address.
4
Press OK.
5
Press Stop/Exit.
POP3 Server address
This field displays the Node Name or IP address of the POP3 server (incoming E-mail server) used by the