S&S Cycle 510 Chain Drive Camshaft Hardware User Manual
Cycle, inc
S&S
®
Cycle, Inc.
14025 County Hwy. G Box 215
Viola, Wisconsin 54664
Phone: 608-627-1497 • Fax: 608-627-1488
Technical Service Phone: 608-627-TECH (8324)
Technical Service Email: [email protected]
Website: www.sscycle.com
S&S 510 Chain Drive Camshaft
Hardware Information
S&S requires the use of the roller bearing on the rear cam and the Andrews sprocket
when chain drive cams are used. This combination of parts requires a special thickness
washer (#50-7139).
This packet includes 2 washers and one screw. Part #50-7130 and #50-0100 are
used on the outside of the Andrews sprocket. Part #50-7139 is identical to the thrust
washer included with the Roller Bearing Kit, so it can be used on either side of the
roller bearing and is used to replace the OEM thick spacer.
Washer (Included with bearing kit.)
(1.13” OD x .79” ID x .055”)
#50-7130 Washer
(1.13” OD x .325” ID x .125”)
Sprocket - Andrews
#50-7139 Washer
(1.13” OD x .79” ID x .055”)
Roller bearing
#50-0100 Bolt
S&S 510 Chain Drive Camshaft
Hardware Information
S&S requires the use of the roller bearing on the rear cam and the Andrews sprocket
when chain drive cams are used. This combination of parts requires a special thickness
washer (#50-7139).
This packet includes 2 washers and one screw. Part #50-7130 and #50-0100 are
used on the outside of the Andrews sprocket. Part #50-7139 is identical to the thrust
washer included with the Roller Bearing Kit, so it can be used on either side of the
roller bearing and is used to replace the OEM thick spacer.
Washer (Included with bearing kit.)
(1.13” OD x .79” ID x .055”)
#50-7130 Washer
(1.13” OD x .325” ID x .125”)
Sprocket - Andrews
#50-7139 Washer
(1.13” OD x .79” ID x .055”)
Roller bearing
#50-0100 Bolt
S&S
®
Cycle, Inc.
14025 County Hwy. G Box 215
Viola, Wisconsin 54664
Phone: 608-627-1497 • Fax: 608-627-1488
Technical Service Phone: 608-627-TECH (8324)
Technical Service Email: [email protected]
Website: www.sscycle.com
Instruction 51-1048
Revised 4-19-02
C
opyright
© 2001, 2002
by S&S Cycle, Inc.
All rights reserved.
Printed in the U.S.
Instruction 51-1048
Revised 4-19-02
C
opyright
© 2001, 2002
by S&S Cycle, Inc.
All rights reserved.
Printed in the U.S.