Snakebyte Wii Premium Motion Controlle User Manual

Snakebyte Consoles

Advertising
background image

GB

GB

GB

GB

GB

GB

DE

DE

DE

DE

DE

DE

DE

TABLE OF CONTENT

Important Safety Instructions

Introduction

- Thank you very much!

Specifications

Installation

Troubleshooting

Contact and Support

Terms of Guarantee

Further products of the snakebyte range

IMPORTANT SAFETY INSTRUCTIONS

Before using your snakebyte Wireless Motion XS for Wii please read this

manual thoroughly. If you comply with all instructions and tips, using the

Wireless Motion XS is easy and comfortable. Please retain this manual for

future reference.

If you don’t want to lose your warranty, please refrain from disassembling

the Wireless Motion XS – there are no user serviceable parts inside anyway.

Inappropriate handling does invalidate the warranty and leads to

malfunctions of the device.

Keep your Wireless Motion XS away from liquids and liquid containers such

as vases, bottles, hot baths, jacuzzi tubs, etc. Any damage occurring from

liquids invalidates the warranty.

INTRODUCTION

Thank you very much!

Congratulations for purchasing the snakebyte Wireless Motion XS. We really ap-

preciate your trust in our fine products. This controller was thoroughly produced

under constant quality inspection and according to international quality and

safety standards. Have fun with this controller.

If you follow this manual, set up, operation, and basic maintenance of the Wi-

reless Motion XS is cakewalk. In case you encounter any problems exceeding

this manual please contact your dealer or our friendly customer support under

[email protected].

SPECIFICATIONS

Motion XS Controller extension for the snakebyte Remote XS Controller or

for use with the Wii Remote

Wireless connection to the main controller (available separately)

State-of-the-art 2.4 GHz wireless technology, virtually lag-free

Extends your Remote XS Controller/Wii Remote with two additional

buttons, a full analogue thumbstick and an extra motion sensor enhancing

the gameplay

Extra small wireless receiver plugs into the main controller and allows for

untroubled gameplay

No interference: up to four Wireless Motion XS Controllers can be used

simultaneously in multiplayer matches

100% compatible with all games that support the original Nunchuk

External On/Off and synchronisation buttons

Two rechargeable Ni-MH batteries as well as USB charging cable included in

delivery, the controller can be charged using any USB port

Technical data is subject to change without notice.

INSTALLATION

Connecting the Wireless Motion XS

Equip your Wireless Motion XS with the NiMH batteries included in the

delivery

Connect the Wireless Motion XS receiver with the Extension Connector Port

on the Wii Controller

Once console and Wii Remote are activated press the Sync button on the

Wireless Motion XS to establish a wireless connection between the Motion

XS and the receiver. A proper connection is indicated by constantly lighting

LEDs on the receiver and the Wireless Motion XS.

Proper use of the Wireless Motion XS

The Wireless Motion XS can not be used on its own, without the Wii Remote or

snakebyte Remote XS. It adds another dimension to Wii gameplay, but only com-

plements the main controller.

When using the motion sensing features of the Wii Remote and the Wireless Mo-

tion XS please make sure not to move too excessively. Be sure not to hurt people

and/or damage objects around you. Make sure not to lose the Wii Controller and

Wireless Motion XS while playing by always wearing the wrist strap and holding

both items tightly.

There is no need to deactivate your Wireless Motion XS by pressing the Sync

button or removing the batteries from the battery compartment. If the Motion

XS is not used for some minutes it will automatically enter sleep mode. You just

need to press any button to reactivate the Wireless Motion XS. In certain cases

you might have to carry out the synchronisation process again (e.g. after an ex-

tended period of inactivity).

Consult your game’s manual to find out if the Wireless Motion XS needs to be

used. Not all games require a Motion XS Controller extension.

The Wireless Motion XS Controller can also be used with regular, non-recharge-

able batteries. In this case make sure the controller does not get connected to a

USB port under use of the cable that is included in the delivery. Charging Alkali-

ne batteries may lead to product defects and serious injuries.

For further information please refer to your Wii console’s manual.

TROUBLESHOOTING

If you encounter any problems using the snakebyte Wireless Motion XS please

read this section carefully before contacting our customer support or your dea-

ler.

1. My Wireless Motion XS does not work correctly at all.

Turn off your Wii console and turn it on again immediately. Make sure your Wii

Controller is synced to the console and the Wireless Motion XS receiver is firmly

attached to the Wii Controller’s Extension Port. Please refer to the installation

instructions above.

2. My game seems to receive input signals although I do not even touch

the Wireless Motion XS.

Repeat the synchronisation process by pressing the Sync button on the Wire-

less Motion XS, this time making sure the analogue thumbstick of the Wireless

Motion XS remains in its neutral position during syncing. You may also reset the

thumbstick by making sure it rests in its neutral position and simultaneously

pushing and holding A, B, Plus & Minus on the Wii Controller it is connected with.

Keep the buttons pushed for at least three seconds.

3. My Wireless Motion XS Controller is incompatible with certain

accessories.

Unfortunately compatibility with 3rd party accessories can not be guaranteed.

This especially refers to light guns, sports packs and the like. Further more in-

compatibilities with Nintendo accessories may also occur due to differences in

regard to button layout and/or shape. You should keep in mind that this product

is not a copy of Nintendo’s Wii Nunchuk.

CONTACT AND SUPPORT

If you still encounter problems that can not be solved by reading the section

„troubleshooting“, please contact us:

Sunflex Europe GmbH

Obere Oese 2–4

58675 Hemer

Germany

[email protected]

TERMS OF GUARANTEE

We issue a guarantee of two years after purchase of the snakebyte Wireless Moti-

on XS. Therefore, please preserve your invoice, e.g. together with this manual.

In order not to invalidate the warranty and to protect your health never try to

repair and/or disassemble the device. There are no user serviceable parts inside

anyway. On top, the danger of electric shock or even fire is reduced conside-

rably.

The guarantee is limited to defective parts or faulty assembly of the Controller

exclusively, i.e. it only covers manufacturing defects.

Amongst others the following defects can not be asserted:

basically all defects resulting from violation of this manual

defects resulting from improper use or cleaning

mechanical and optical flaws (e.g. scratches, broken casing caused by brute

force or carelessness)

defects caused by force majeure

any defects caused by components that are not themselves parts of or the

Controller itself.

INHALTSVERZEICHNIS

Zu Ihrer Sicherheit

Einführung

- Vielen Dank

Spezifikationen

Installation

Troubleshooting

Kontakt und Support

Garantiebedingungen

Weitere Produkte aus dem snakebyte-Sortiment

ZU IHRER SICHERHEIT

Bitte lesen Sie diese Anleitung noch vor Anschluss und Inbetriebnahme

des snakebyte Wireless Motion XS sorgfältig durch und nehmen sich alle

Hinweise und Tipps zu Herzen. Für den Fall, dass Sie etwas nachschlagen

müssen, bewahren Sie diese Anleitung am besten einfach auf.

Wenn Sie nicht auf die snakebyte Garantie- und Gewährleistungen verzich-

ten möchten, sollten Sie den Wireless Motion XS auf keinen Fall öffnen – es

befinden sich weder inner- noch außerhalb des Gerätes durch den Nutzer

reparierbare Komponenten. Unsachgemäße Handhabung führt in 100%

aller Fälle zum Garantieverlust und oft zur Zerstörung des Geräts. Lassen Sie

Reparaturen deshalb ausschließlich vom qualifizierten Kundendienst durch

führen.

Halten Sie den snakebyte Wireless Motion XS von Gefäßen mit Flüssigkeiten

wie z.B. Blumenvasen, Flaschen, Badewannen, Schwimmbecken, Whirlpools

etc. fern. Defekte durch Flüssigkeitskontakt sind von jeglicher Garantie-

leistung ausgeschlossen.

EINFÜHRUNG

Vielen Dank!

Herzlichen Glückwunsch zum Kauf des snakebyte Wireless Motion XS. Wir wissen

Ihr Vertrauen in unsere Produkte zu schätzen. Dieses Produkt wurde mit beson-

derer Sorgfalt von qualifizierten Fachkräften und unter ständiger Qualitätskont-

rolle hergestellt. Wir wünschen Ihnen viel Spaß mit diesem nützlichen Tool.

Anhand dieser Anleitung sind Anschluss, Inbetriebnahme und grundlegende

Wartung des Wireless Motion XS eigentlich kinderleicht. Sollten sich dennoch

über den Inhalt dieser Anleitung hinausgehende Fragen zu Installation und

Nutzung des Gerätes ergeben, wenden Sie sich bitte an Ihren Fachhändler oder

unseren freundlichen Kundensupport unter [email protected].

SPEZIFIKATIONEN

Motion XS Controller Erweiterung für den snakebyte Remote XS Controller

oder zur Nutzung mit der Wii Remote

Kabellose Verbindung zum (separat erhältlichen) Hauptcontroller

Modernste 2.4 Ghz Funktechnologie, buchstäblich verzögerungsfrei

Erweitert den Remote XS Controller/Wii Remote um zwei zusätzliche

Aktionstasten, einen Analogstick sowie einen weiteren Bewegungssensor

Superkleiner Wireless-Receiver zur Verbindung mit dem Hauptcontroller

garantiert unbeschwertes Gameplay

Keine Interferenzen: bis zu vier Wireless Motion XS Controllers können

gleichzeitig bei Multiplayer Matches genutzt werden

100% kompatibel zu allen Spielen, die den originalen Nunchuk unterstützen

Externer An/Aus - sowie Synchronisationsbutton

Zwei Ni-MH Akkus, sowie USB Ladekabel im Lieferumfang enthalten, der

Controller kann an einem beliebigen USB Port geladen werden

Änderungen technischer Daten sind vorbehalten.

INSTALLATION

Anschluss des Wireless Motion XS

Bestücken Sie den Wireless Motion XS mit den im Lieferumfang enthaltenen

Akkus

Verbinden Sie den Empfänger des Wireless Motion XS mit dem Erweite-

rungsanschluss des Hauptcontrollers

Sobald Ihre Wii Konsole und die Wii Remote oder Snakebyte Remote XS

aktiviert wurden, drücken Sie die Sync Taste auf der Vorderseite des Wireless

Motion XS, um eine kabellose Verbindung zwischen Wireless Motion XS und

Empfänger herzustellen. Die Verbindung wird durch konstant leuchtende

LEDs auf dem Wireless Motion XS und dem Empfänger angezeigt.

Korrekter Gebrauch des Wireless Motion XS

Der Wireless Motion XS kann ausschließlich in Verbindung mit einer Wii Remo-

te oder snakebyte Remote XS genutzt werden. Es eröffnet erweiterte Game-

playmöglichkeiten, vervollständigt allerdings lediglich den Hauptcontroller.

Nutzen Sie beim Spielen die Bewegungssensorik von Wii Remote und Wireless

Motion XS, so achten Sie darauf, beide Komponenten nicht übertrieben zu

schwingen und damit Personen oder Gegenstände in Ihrer direkten Umgebung

zu gefährden. Tragen Sie immer die Handgelenksschlaufe, damit Ihnen die Wii

Remote und der Motion XS nicht aus Versehen aus den Händen gleiten.

Es besteht keine Notwendigkeit, den Wireless Motion XS manuell zu deaktivie-

ren, indem Sie den Sync Taster drücken oder sogar die Batterien entnehmen. Der

Wireless Motion XS schaltet automatisch in einen Standby Modus, sobald es eini-

ge Minuten lang ungenutzt bleibt. Um den Wireless Motion XS danach wieder zu

nutzen, müssen Sie ihn aktivieren, indem Sie eine Taste des Controllers drücken.

Unter gewissen Umständen müssen Sie den Synchronisierungsprozess erneut

durchführen (z.B. bei längeren Spielpausen).

Konsultieren Sie die Anleitung oder die Rückseite der Verpackung Ihres Spiels

um herauszufinden, ob die Nutzung des Wireless Motion XS unterstützt wird.

Nicht alle Spiele unterstützen oder benötigen die Erweiterung.

Der Wireless Motion XS Controller kann auch mit herkömmlichen, nicht auflad-

baren Batterien betrieben werden. Vermeiden Sie unter allen Umständen, dass

der USB Lade Port des Controller angeschlossen und die Batterien somit geladen

werden, wenn herkömmliche Batterien genutzt werden.

Weiterführende Informationen entnehmen Sie bitte der Anleitung Ihrer Wii Kon-

sole.

TROUBLESHOOTING

Sollten Probleme bei der Nutzung des snakebyte Wireless Motion XS auftreten,

lesen Sie bitte erst den folgenden Abschnitt über potentielle Fehlerquellen auf-

merksam durch, bevor Sie den Kundendienst oder Ihren Händler kontaktieren.

1. Der Wireless Motion XS funktioniert überhaupt nicht.

Deaktivieren Sie Ihre Wii Konsole und starten sie erneut. Stellen Sie sicher, dass

der Hauptcontroller mit der Konsole ordnungsgemäß synchronisiert ist und der

Empfänger des Wireless Motion XS fest im Erweiterungsport sitzt. Bitte verfahren

Sie laut den obenstehenden Installationsanweisungen.

2. Mein Spiel scheint Signale zu empfangen, obwohl ich den Wireless

Motion XS gar nicht berühre.

Wiederholen Sie den Synchronisierungsprozess des Wireless Motion XS, aller-

dings unter der Voraussetzung, dass der Analogstick des Wireless Motion XS sich

während der Synchronisierung in neutraler Stellung befindet.

Sie können auch einen Reset durchführen und die Nullstellung wieder herstel-

len, indem Sie am angeschlossenen Hauptcontroller A, B, Plus & Minus gleichzei-

tig drücken und für ungefähr drei Sekunden halten.

3. Mein Remote XS Controller ist inkompatibel mit Zubehörprodukten.

Leider kann eine Funktion mit Zubehörprodukten anderer Dritthersteller nicht

garantiert werden. Dies trifft insbesondere auf Sports Packs, Pistolen und der-

gleichen zu. Ebenso sind Inkompatibilitäten mit originalem Nintendo Zubehör

möglich, aufgrund der teilweise andersartigen Beschaffenheit der Tasten oder

leichten Abweichungen die Form des Controllers betreffend. Der Wireless Mo-

tion XS Controller ist keine Kopie des Nintendo Nunchuks, sondern ein eigen-

ständiges Produkt.

KONTAKT UND SUPPORT

Bei Problemen, die durch oben genannte Lösungsansätze nicht behoben wer-

den können, kontaktieren Sie uns bitte unter den folgender Adresse:

Sunflex Europe GmbH

Obere Oese 2-4

58675 Hemer

Deutschland

E-Mail: [email protected]

GARANTIEBEDINGUNGEN

Sie haben Anspruch auf eine Gewährleistung innerhalb von zwei Jahren nach

Kauf des snakebyte Motion XS Controllers. Bitte bewahren Sie daher Ihre Rech-

nung oder den Kaufbeleg sorgfältig auf, am besten zusammen mit dieser An-

leitung.

Um Ihren Garantieanspruch zu wahren und Ihre Gesundheit zu schützen, sollten

Sie nicht versuchen, selbständig Reparaturen am Gerät durchzuführen. Im Inne-

ren des Motion XS Controllers befinden sich keine Teile, die durch den Benutzer

gewartet oder repariert werden können. Somit vermeiden Sie auch die Gefahr

eines elektrischen Schocks oder sogar eines Brandes.

Die Garantie erstreckt sich lediglich auf fehlerhafte Komponenten des Motion

XS Controllers und Verarbeitungsmängel, die während der Herstellung aufge-

treten sind.

Folgende Mängel können daher nicht geltend gemacht werden:

grundsätzlich alle Schäden, die auf Missachtung dieser Anleitung fußen

Defekte durch unsachgemäße Nutzung oder falsche Reinigung

mechanische und optische Schäden (z.B. Kratzer, Brüche des Gehäuses z.B.

durch Gewaltanwendung jeglicher Art oder grobe Fahrlässigkeit)

Schäden aufgrund höherer Gewalt

Defekte hervorgerufen durch angeschlossene Komponenten, die sich nicht

im Lieferumfang des Motion XS Controllers befinden

Z-Button

Z-Taste

Bouton Z

C-Button

C-Taste

Bouton C

analogue Thumbstick

Analogstick

stick entièrement analogique

SYNC-Button

SYNC-Taste

Bouton SYNC

POWER-Button

POWER-Taste

Bouton Marche/Arrêt

USB-Port

USB-Anschluss

Port USB

Advertising