Spaulding Lighting RDIC with BOC User Manual

Save these instructions, Compact wall sconce series-rdic, Installation instructions

Advertising
background image

INSTALLATION INSTRUCTIONS - RDIC SHEET 1 OF 4

SAVE THESE INSTRUCTIONS

701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000

NOTE:

This luminare is designed for outdoor lighting applications with ambient tempertures not exceeding 40°C

WARNINGS:

Dangerous voltage exist within the unit and all precautions usually observed in handling high voltage equipment should be observed

when replacing light engine or otherwise servicing luminares. Disregarding this warning could result in electrical shock and possible

injury to the individual installing or servicing this equipment. Installation and servicing should be done by qualified personnel.

93052311 Rev.A

WARNING!

Fixtures must be grounded and installed in accordance with the National Electrical Code and all local codes.

Failure to do so may increase the

RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH.

Install and

use so fixture failures do not cause a hazard and use only in environments for which the product is specifically marked.

WARNING!

This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other

reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.

CAUTION!

Follow ALL luminaire recommendations, product markings, instructions, restrictions and warnings regarding

luminaire operation and burning position. Luminaire label shows electrical and environmental requirements and

restrictions.

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A

PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS

INVOLVED

Turn off electric power to all affected circuits and allow to cool before servicing.

A regularly scheduled maintenance program should be established to retain optimum light output and reduce heat

retention. Dusting with a soft, clean, dry cloth is normally sufficient for the optical system. Any accumulation of dust or dirt

should be removed regularly.

Carefully read these instructions before installing product. If you do not understand these instructions, before starting any

work, contact your Hubbell Lighting distributor or [email protected] or (864) 678-1000

Give instructions to facility owner/manager for future reference.

INSTALLATION

INSTRUCTIONS

Compact Wall Sconce

Series-RDIC

READ THOROUGHLY BEFORE INSTALATION

http://www.spauldinglighting.com

Advertising