Steriflow CGDM Series - Manual

STERI FLOW TM by Jordan Valve
3170 Wasson Road • Cincinnati, Ohio 45209
Telephone 513-533-5600 • Fax 513-871-0105
Toll-FreeTelephone: 800-543-7311
[email protected] • www.steriflowvalve.com
CGDM Series
Clean Gas Distribution Manifold
The CGDM Series is a soft seated, straight through ported
multi-valve gas distribution manifold. It is used for the
distribution of purge gas or as a distribution point for air/
gas actuated valves and production equipment in a clean
environment. Six or twelve outlet models are standard with
tri-clamp or threaded connections. If additional outlets are
required, simply attach another CGDM with appropriate
sanitary fittings or nipples (model dependent). The CGDM
Series is used in place of conventional hand piped methods
for the distribution of gases and features o-ring seals and
backseated bonnets to insure against stem leakage when
the valves are fully open.
F
EATURES
• Reduce materials and installation costs – use a clean
gas distribution manifold in place of conventional field-
fabricated assemblies of pipe/tubing, nipples and ball
valves for a lower cost, easier to install valve
assembly.
• Reduces potential leakage – the bubble-tight shutoff
provided by the soft seats minimizes the potential for
leakage. In addition, the integral one piece bonnet
design reduces the number of external crevices for a
crevice minimum exterior.
• Available in threaded and tri-clamp connections.
• Integral mounting plates – bolts directly to work
station, or mounts with U-bolts to a 2" pipe.
• Fully backseated bonnets – prevents accidental stem
removal and blowout. Bonnets are pinned to further
prevent inadvertent removal.
• Anti-tamper handles – the CGDM Series features anti-
tamper safety handles that are operated with
standard maintenance tools.
Sanitary Valves
CGDM Series Clean Gas Distribution Manifolds
O
RDERING
S
CHEMATIC
CGDM06-1, 6 bonnet (3/4" FNPT x 1/2" FNPT outlets)
CGDM06-2, 6 bonnet (1" TC x 1/2" TC outlets)
CGDM12-1, 12 bonnet (3/4" FNPT x 1/2" FNPT outlets)
CGDM12-2, 12 bonnet (1" TC x 1/2" TC outlets)
Contact Steriflow for availability of optional end
connections.