Steriflow Mark 94 Series User Manual

Mark 94 series, High flow sanitary steam traps, Sanitar y v alv es mark 9 4 sanitar y steam traps

Advertising
background image

Mark 94 Series

High Flow Sanitary Steam Traps

STERI

FLOW

TM

by Jordan Valve

3170 Wasson Road • Cincinnati, Ohio 45209

Telephone 513.533.5600 • Fax 513.871.0105

Toll-Free Telephone: 800.543.7311

[email protected] • www.steriflowvalve.com

The Mark 94 is a thermostatic steam trap designed

specifically for use in high capacity clean steam

systems where sanitary conditions must be maintained.

It features a 20 Ra internal finish, and a self-draining

design, to minimize the possibility of medium entrap-

ment and bacterial growth.
The Mark 94 has been designed to provide high con-

densate flow rates during SIP heat up, allowing ves-

sels and other process equipment to reach validation

temperature in minimum time.

The proprietary fill, bellows and orifice design minimize

the subcooling required to open the trap during SIP

temperature hol, insuring fast drainage under lower

load conditions to help insure against low temperature

faults.

The Mark 94 is designed for use up to 50 psig (3,5 bar)

inlet pressure.

O

peratiOn

During SIP Heatup, the bellows assembly is fully open

to discharge all air, non-condensate gases and cool

condensate. The heat of the entering steam causes the

element to expand, closing the valve. As condensate

accumulates in the body, the element cools, causing the

bellows/stem tip to retract allowing condensate to flow.

F

eatures

• Body and solid internal components constructed of

ASTM A479 316L

• Polished components – body interior and exterior

are mechanically polished to 20 Ra finish

• Sanitary clamp ends standard, other ends (tube

weld, threaded, ISO/DIN) available upon request

• Self draining when installed vertically (outlet side

down)

• New design provides excellent flow rates with low

subcooling during heat up and temperature hold

period

• FDA, USP Class VI gasket standard
• Horizontal connections available

a

pplicatiOns

• Typical applications are: fermentors,

bioreactors, sterilizers/autoclaves

• Condensate drainage from large tube

clean steam distribution loops

• Condensate drainage from large scale

process systems – fermenters, bioreactors,

holding vessels, separators, chromatogra-

phy vessels, etc.

Sanitar

y V

alv
es Mark

9

4

Sanitar

y Steam

Traps

Advertising