Swiss+Tech Carabiner Flashlight User Manual

Carabiner led flashlight, Linterna de luz led con mosquetón, Battery replacement

Advertising
background image

Battery Replacement

1. Unscrew the end of the flashlight and

remove the old batteries.

2. Insert 4 new LR41 batteries with the

positive (+) ends positioned away
from the bulb.

3. Replace end of flashlight and screw in

until the light comes on, then loosen
one quarter turn to turn off.

To Turn On Flashlight:

Turn flashlight end clockwise 1/4 turn.
To turn off, turn end only until the light
goes off.

Limited One Year Warranty

This product is covered by a limited one year warranty

to the original purchaser in that this product is free

from defects in workmanship and materials. During

the warranty period, these products will either be

repaired or replaced with a product of equal or greater

value, excluding any custom engraving or printing.
Damage through normal wear and tear (including

battery expiration and surface coatings), repair or

alteration, misuse, abuse, neglect, accident, improper

storage and handling, fire, negligence, improper

cleaning, circumstances not directly attributable to

manufacturing defects, or act of God is not included.
THIS WARRANTY IS IN LIEU OF ALL OTHER WAR-

RANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO, IMPLIED WARRANTY OF MERCHANT-

ABILITY OR FITNESS FOR A PARTICULAR USE.
This warranty gives you specific legal rights, and you

may also have other rights which vary from state to

state. Simply return your SWISS+TECH

®

brand product

postpaid and insured to:
Swiss+Tech Products

30725

Solon Industrial Pkwy

Solon, OH 44139

Made in China.

MMMMMMMMI

™ and

MI

®

are

trademarks of Swiss+Tech Products. Specifications

are subject to change without notice.

©2014 Swiss+Tech Products, Solon, OH 44139 USA

Carabiner

LED

Flashlight

ST74158

swisstechtools.com

1-800-414-8799

This product contains button batteries.

IF SWALLOWED, batteries could cause

severe injury or death in just 2 hours.

SEEK MEDICAL ATTENTION IMMEDIATELY.
• Always purchase the correct size and grade

of battery most suitable for the intended use.

• Clean the battery contacts and also those

of the device prior to battery installation.

• Ensure the batteries are installed

correctly with regard to polarity (+ and -).

• Remove batteries if they are spent or if

product is unused for long periods of time.

• Always replace the whole set of batteries

at one time. DO NOT mix old and new.

• DO NOT MIX batteries of different types,

such as Alkaline, Standard (carbon-zinc)

and/or Rechargeable (nickel-cadmium).

• Do not dispose of batteries in fire.

• Batteries should be recycled or disposed

of as per state and local guidelines.

BATTERY WARNINGS:

8" x 6" folds to 2" x 1.5"

ENGLISH, SPANISH

LR41 Batteries (4)

ST74158

swisstechtools.com

1-800-414-8799

Este producto contiene pilas de botón.

Si se

TRAGAN las pilas, podrían provocar daños graves
o la muerte en sólo 2 horas.

SOLICITE ATENCIÓN

MÉDICA INMEDIATAMENTE.
• Compre siempre pilas de clasificación y tamaño

correctos que se adapten mejor al uso previsto.

• Antes de instalar las pilas, limpie los contactos

de las pilas y los del dispositivo.

• Cerciórese que las pilas estén instaladas

correctamente según la polaridad (+ y -).

• Extraiga las pilas si se agotan o si no va a utilizar

el producto durante un largo período de tiempo.

• Sustituya siempre todas las pilas de un

dispositivo al mismo tiempo. NO mezcle las pilas
nuevas y las antiguas.

• NO MEZCLE pilas de diferentes tipos, por

ejemplo, alcalinas, estándar (cinc-carbono) o
recargables (níquel cadmio).

• NO exponga las pilas al fuego.
• Las baterías deben reciclarse o eliminarse según

las reglamentaciones estatales y locales.

ADVERTENCIAS DE LAS PILAS:

Sustitución de pilas

1. Desatornille el extremo de la linterna

para retirar las pilas antiguas.

2. Coloque 4 pilas LR41 nuevas con los

polos positivos (+) lejos del foco.

3. Vuelva a colocar el extremo de la

linterna y enrosque hasta que se
encienda la luz, enseguida gire un
cuarto de vuelta para apagarla.

Para encender la linterna:

Encender girando el extremo de la linterna
un cuarto de vuelta en sentido horario.
Para apagar, gire el extremo de la linterna
solo hasta que se apague.

Linterna de

luz LED con

mosquetón

Pilas LR41 (4)

Garantía limitada a un año

Este producto dispone de una garantía limitada a un año

para el comprador original en la que se garantiza que el

producto está libre de defectos en el funcionamiento y

en los materiales. Durante el período de garantía, este

producto se reparará o se sustituirá por otro de igual o

de mayor valor, sin incluir la pintura ni el grabado

personalizados.
Esta garantía no incluye el daño producido como

consecuencia del uso normal (pilas gastadas y

recubrimiento de la superficie), de reparación o

alteración, de uso incorrecto, de abuso, de negligencia,

de accidente, de almacenamiento y manejo

inadecuados, de incendio, de limpieza incorrecta, de

circunstancias que no se atribuyan directamente a

defectos de fabricación ni de causas de fuerza mayor.
ESTA GARANTÍA SUSTITUYE A TODAS LAS DEMÁS

GARANTÍAS, EXPLÍCITAS O IMPLÍCITAS, INCLUYENDO,

ENTRE OTRAS, LA GARANTÍA IMPLÍCITA DE

COMERCIABILIDAD O DE ADECUACIÓN A UN USO

CONCRETO.
Esta garantía ofrece derechos legales específicos y

también puede incluir otros derechos que varían de un

estado a otro. Sólo tiene que devolver su producto de

marca SWISS+TECH

®

con franqueo pagado y

asegurado a: Swiss+Tech Products

30725

Solon Industrial Pkwy

Solon, OH 44139 (EE. UU.)

Fabricado en China.

MMMMMMMMI

y

MI

®

son

marcas comerciales de Swiss+Tech Products. Las

especificaciones están sujetas a modificaciones sin aviso.

©2014 Swiss+Tech Products, Solon, OH 44139 (EE. UU.)

Carabiner

LED

Flashlight

Advertising