TaoTronics QCY-J02 - Manual

Exclusively Distributed by
BLUETOOTH HEADSET
USER MANUAL
North America
Europe Union
Website: www.taotronics.com
E-Mail: [email protected]
Tel: 1-888-456-8468 # 4
(Monday-Friday: 9:00 – 18:00 PST)
Address: 2880 Zanker Rd, Suite 203, San
Jose, CA 95134
Asia Pacific
Website: www.taotronics.com
E-Mail:[email protected](Japan)
Website: www.taotronics.com
E-Mail:
[email protected] (United Kingdom)
[email protected] (Germany)
[email protected] (France)
[email protected] (Spain)
[email protected] (Italy)
EU Importer: ZBT International Trading
GmbH Lederstr 21a, 22525 Hamburg,
Deutschland
Voice Notification
When performing some specific
actions, the headset will give voice
notification as following:
Status /
Action
LED indicator
Turn ON Blue light flash 3 times
Turn OFF Red light is on for 2 seconds
Headset has
been turned
ON
Blue light flash once every
7 seconds
In pairing
mode /
Searching
Blue and red light flashing
alternatively
Paired and
working
Blue light flash once
every 7 seconds
Charging Red light is on constantly
Fully
charged
Blue light is on constantly
Battery low Red light flash once every 20
seconds with a warning tone
Streaming music
Once you have established
Bluetooth connection with smart
phone or other stereo music
device, use the music player
feature to listen to stereo music.
Adjust the volume with the volume
Basic phone call actions
Action
Answer a call Press the multi-function
button once
Press the multi-function
button once
End a call
Adjust the
volume
Mute /
resume a call
Press the volume + or –
button
Headset Control
During a call, double press
the multi-function button
Redial last
number
Double press the
multi-function button
Reject an
incoming call
Press and hold the
multi-function button for 3
seconds
Call waiting Press the multi-function
button to answer the second
call and put the first call on
hold
Call switching
Power ON
Press the multi-function
button twice
Slide the power button to ON
position
Power OFF Slide the power button to
OFF position
Outside
Bluetooth
range
Out of range
Mute call Mute on
Resume call Mute off
Action
Incoming call Announcing incoming call
number
Hello Power on
Power off
Pairing
Goodbye
Voice notification
Pairing
Successfully
paired
Connected
Bluetooth
disconnected
Disconnected
Battery level
low
Battery low
Specifications
32°F – 104°F(0°C to 40°C)
Size
Weight
Working Temp
2.20 x 0.75 x 0.35 inch
0.02 lbs
Bluetooth
Version
Bluetooth
Profile
A2DP, HFP (1.6), HSP (1.2)
2.4 GHz Frequency
Range
Charging
time
Up to 33 feet / 10 meters
(in open space)
4.0
2 hours
Talking time Up to 5 hours
Standby time Up to 140 hours
Compatible
device
Smartphone, iPad, tablets,
laptops, PC (with Bluetooth
connectivity), Bluetooth
music player, Bluetooth
transmitter
Patent
number
Model
Number
201230166945.2
J02
Input power 5 V (via Micro-USB port)
Battery type Rechargeable
Li-Polymer (80 mAh)
Charging
The J02 Bluetooth headset is
partially charged at the factory.
Please make sure that you fully
charge it before using it for the first
time. To charge the unit:
1. Plug the micro-USB end of the
charging cable into the headset.
2. Plug the USB end of the
charging cable to any USB
charger or USB port from your
computer.
3. Red LED indicator will be ON
when charging is in progress.
4. When charging is finished, the
LED indicator will turn blue.
Normally it takes 2 hours to fully
charge the battery from empty.
We recommend charge the
headset at least once every month
Blueto oth V4.0 3.7 v -- - 80 mA Mad e in Chi na
①
Multi-function button
⑤
Mic
⑥
LED indicator
⑦
Power on
⑧
Power off
②
Charging port
③
Volume +
④
Volume -
1 x J02 Bluetooth Headset
1 x USB charging cable
1 x micro-USB headphone extension
2 x ear hook
3 x earbud tip
1 7
8
Blu etooth V
4.0
3 .7 v --- 8
0 mA
Made
in Chin
a
3
4
2
6
5
Pairing to two smartphones
The Bluetooth headset is capable
of simultaneously connect to two
smartphones. To do this:
• Follow the instructions in the
“Pairing” section to connect the
Bluetooth headset to smartphone
1.
• Once connection is successfully
established, disable the Bluetooth
function on smartphone 1, and
turn off the Bluetooth headset.
• Follow the instructions in the
“Pairing” section to connect the
Bluetooth headset to smartphone
2.
• Once connection between
smartphone 2 and the Bluetooth
headset is established, go back
to smartphone 1, and turn on the
Bluetooth function on smartphone
1.
• The Bluetooth headset (J02)
should appear in the connection
list, simply tab it to connect if it
doesn’ t connect automatically.
You have now maintained an active
connection with 2 smartphones at
the same time.
You can now make / answer phone
calls from both smartphones.
Note: You can also pair two
Bluetooth devices with the headset
at the same time.
Connection priority
When connected to two
smartphones simultaneously, the
last phone used for call /answer
calls will have higher priority.
For example, an incoming call is
answered with smartphone 1.
During the call, a second call is
coming to smartphone 2. Press the
multi-function button once will
answer call 2 with smartphone 2.
But call 1 on smartphone 1 is still
on.
When call 2 is ended (by operation
from smartphone 2), the headset
will return to call 1 on smartphone
1.
Reconnecting
Once you have successfully paired
the headset with a Bluetooth
device, you no longer need to bring
both into pairing mode for them to
pair again. Simply turn on both
device, and they should
automatically connect with each
other.
For some smartphones, you may
have to select the Bluetooth
headset from the list of available
devices, and tab to connect.
Pairing with PC
Before connecting to your PC,
please make sure that:
• Your PC has Bluetooth function, or
have Bluetooth dongle installed
and working.
• Download and install the latest
Bluetooth driver for your
operation system.
To connect the Bluetooth
headset with your PC:
• Turn on the Bluetooth headset by
sliding the power button (Blue
light flash 3 times when turned
on).
• Press and hold the function button
until you see the LED indicator
flashing in red and blue.
Warranty
1 year parts and labor warranty. If
the headset becomes defective
due to manufacture fault, we will
fix it or replace it free of charge.
However, customer is liable for
the shipping cost past 3 months
from original purchase date. We
do not cover damage caused by
the following:
• any abusive use and destruction
• normal ware and aging
• over exposure to chemical,
heat, moisture, fire, and
radioactive substance
• natural disaster
This warranty does not apply to
any second hand purchased
headset.
FAQ / Trouble shooting
Q: The connection is not stable
and cuts out intermittently.
A: While the range of Bluetooth is
33 feet (10 meters), the
optimal range for Bluetooth
stereo transmission is 5 – 10
feet (or 3 meters). Bluetooth
signal is prone to loss caused
by impenetrable objects like
walls and ceilings. Additionally,
other radio transmitting device
in the area can also interfere
with Bluetooth transmission.
Please make sure there are no
objects between the headset
and your Bluetooth device, as
well as check out any other
radio transmitting device
within range.
Q: I have turned the Bluetooth
headset on, but it is not
connecting to my smartphone /
music player.
A: In order for both devices to
connect, you will need to bring
both to pairing mode. Simply
turn on any device is not going
to make them connect. Please
follow the instruction in the
“pairing” section.
Q: I have established connection
with my smartphone / music
player, but I am not hearing
any sound.
A: Please make sure that you
turn up the volume of both
devices. Some smartphone
requires you to setup the
Bluetooth headset as an audio
output device before sound is
transmitted. Please see the
instruction of your smartphone
for details. If you are using a
music player or other
Bluetooth device, please make
sure it supports A2DP stereo
music profile.
Q: I cannot hear the headset very
clearly.
A: Please adjust the volume on
your phone and headset.
Make sure there is no source
of interference nearby. Stay
close to your smartphone /
music player.
Q: The other person cannot hear
my call clearly.
A: Make sure your phone is not
connected to another
Bluetooth device. Bring your
smartphone closer to you and
reposition the headset.
Q: Where can I get more
technical support?
A: Please email us at
[email protected].
Make sure you include your
purchase order ID for
reference purpose.
Maintenance
• Battery care: make sure you
turn off the headset when it is
not in use. If you have not used
the headset for more than 1
month, please make sure you
fully charge it before use.
• Cleaning: use a soft, dry cloth
the wipe the surface carefully.
Model number:J02
Thank you
We appreciate your choice of QCY
“Jack” J02 Bluetooth headset
exclusively distributed by
TaoTronics. Please read this
manual carefully. Make sure you
understand all information before
using this headset. If you need any
assistance, please feel free to
contact us.
Feature
• Cutting-edge Bluetooth 4.0
technology
• Easy set up in minutes with most
Bluetooth devices
• Up to 5 hours of talk time or 140
hours of standby with a single
charge
• Excellent sound quality with latest
CVC 6.0 Echo/Noise cancellation
technology for better clarity
• Works with music players, smart
phones, tablets, etc.
• Easy to use with convenient
controls
• Music control options with A2DP
profile
• Voice notification
• Headset battery meter display on
iPhone/iPad
• Multipoint support connection with
2 devices at the same time
• Comfortably fit either ear
Package Content
Buttons and connections We recommend charge the
headset at least once every month
even when the battery is not fully
empty.
Note: You cannot use the headset
while it is charging
Assemble the headset
The J02 headset comes with 2 ear
hook and 3 earbud tips. These
accessories are interchangeable to
best fit your wearing style.
Wearing the headset
1. Place the headset into your ear,
pointing straight down.
2. Then twist the headset upwards
so it points directly at your
mouth.
3. You should feel the headset
fitting securely in your ear.
Pairing
In order to pair the Bluetooth
headset with your smartphone or
any other device, you will need to
bring it to pairing mode first. Please
follow the following steps:
1. Turn on the headset by sliding
the power button.
2. Press and hold the multifunction
button for 5 seconds or until you
see the LED indicator flashing in
red and blue
alternatively.
3. Once the LED indicator is
flashing in red and blue, the
headset is now in pairing mode.
If you are using a smartphone or
tablet, you should now be able to
discover the Bluetooth headset
(J02) listed as available device for
connection. Please follow the
instruction of your smart phone or
tablet to connect to the Bluetooth
headset. If your device is asking for
a password, please enter “0000”.
If you are using a Bluetooth
transmitter or other device without
screen, please follow the
instructions of your device to bring
it to pairing mode. Once the two
devices are in pairing mode, they
should connect automatically.
Please make sure to bring both
devices next to each other or
within 3 feet when pairing.
Note: Please make sure to keep
the device away from other
Bluetooth or radio transmitting
device during pairing stage, as
interference may cause pairing
failure.
• Go to Setting -> Bluetooth Setting
-> Search Bluetooth Device.
• The Bluetooth headset should
appear as an available device
under the name “J02”.
• Click on connect and enter PIN
“0000” if required.
Reset to factory default
setting
Connect the headset to a charging
source and make sure it is charging
(see section “Charging” for more
details). When the device is in
charging mode, press and hold the
multi-function button until you see
the red LED indicator flash 3 times.
This will reset the headset to
factory default setting.
Understanding the LED
indicator
button on the side. Press the
function button once to pause, and
press it again to resume.Press and
hold the volume button to change
to previous track or next track.
Note: for your own health, please
do not listen to music on
max volume for extended
period of time. We
recommend take 1 short
break every 30 minutes to
protect your hearing ability.
Do not use liquid or sprays.
• To clean the tip: Gently pull out
the tip from the earpiece. Wash
and rinse with water only. Make
sure it is completely dry before
re-attaching to the earpiece.
• To clean the wire mesh on the
earpiece: Gently pull out the tip.
Lightly brush the mesh with a
soft, dry cloth. Avoid pressing
on the mesh.
Customer Support Contact
For additional assistance or
warranty cover claim, please
contact us:
E-mail:
[email protected]
(all enquires)
Phone: 1-888-456-8468 # 4 (9:00
am – 6:00 pm PST, Monday to
Friday)
Trademark and license
agreement
Bluetooth ®
The Bluetooth word mark and
logos are owned by the
Bluetooth
® SIG, Inc. and any use
of such trademark for this product
is under license. Other trademark
and trade names are those of
their respective owners.
QCY ®
QCY ® and its logo are registered
and owned by QCY Inc. QCY ®
has agreed to grant TaoTronics
Inc, and Sunvalleytek Inc. sole
distribution rights for its “Jack”
J02 Bluetooth headset in North
America. Other distributors are
prohibited from operating retail,
wholesale, and any commercial
activities in North America for
QCY
® “Jack” J02 Bluetooth
headset.
- 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 1 - - 2 - - 3 - - 4 -
- 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 11 - - 12 - - 13 - - 14 -
75-07314-080 说明书
尺寸：38mmX93mm
材质：双铜 80g
折叠方式：拉折页