TapeTech 12TT Monster Mesh Taper - Manual

Page 1 of 4 ©2001 Ames Taping Tool Systems
MONSTER MESH
®
TAPER
SAFETY PRECAUTIONS
The Mesh Taper uses a Stanley
®
Heavy-Duty Utility Blade
(#11-921) to cut the fiber tape. This blade may be exposed
when the Jaw Assembly is opened during the following
operations:
• Loading a new Tape Roll
• Changing blades
• Clearing a misfeed or jam
WHEN JAW IS OPEN, AVOID HOLDING THE TAPER BY
THE CONTROL TUBE UNLESS REQUIRED TO
CHANGE BLADES. This will prevent inadvertent
operation of the Cutter mechanism.
TAPER NOMENCLATURE
CHANGING BLADES
1. Open Jaw Assembly by separating the 2 retaining
tangs using thumb and forefinger.
2. Separate the Jaw from the Main Chassis.
Sharp Blade –
Keep Clear of
These Areas