TCI KLCUL User Manual

Klc/klcul installation guide

Advertising
background image

KLC/KLCUL

Installation

Guide

TCI, LLC

W132 N10611 Grant Drive

Germantown, WI 53022

Ph: 800-TCI-8282

www.transcoil.com

Version 1.5

Part # 25389

Apr. 2, 2012

TCI, LLC

W132 N10611 Grant Drive

Germantown, WI 53022

Ph: 800-TCI-8282

www.transcoil.com

Field Wiring

KLCUL Field Wiring Connection Terminals

Compression type terminals are provided

for all line wiring connections. The wire size

capacity ranges and tightening torque for

the power terminals are listed in the table.

Warnings and Cautions

Dangerous Voltage Warning: warns of

situations in which a high voltage can

cause injury and/or equipment damage.

The text next to this symbol describes

ways to avoid danger.
General Warning: warns of situations

that can cause physical injury and/

or equipment damage by means other

than electrical. The text next to this

symbol describes ways to avoid the

danger.

General Safety Instructions

Be sure to read, understand, and follow

all safety instructions.

Only qualified electricians should

carry out all electrical installation and

maintenance work on output filter.

All wiring must be in accordance with

the National Electrical Code (NEC)

and/or any other codes that apply to

the installation site.

Disconnect all power before working

on the equipment. Do not attempt any

work on a powered output filter.

The KLC, VFD, motor, and other

connected equipment must be properly

grounded.

The VFD terminals and connected

cables are at a dangerously high voltage

when power is applied to the VFD,

regardless of motor operation.

Warning

Warning

Warning

Warning

Warning

Warning

Warning

Warning

!

!

!

!

See www.transcoil.com for dimension tables

Please contact TCI Technical Support

or your TCI distributor for application

information regarding the use of KLC

output filters on the output side of the VFD.

KLCUL Model

Numbers

Input and Output Motor Power

Wire Size

Torque

(in. - lb.)

KLCUL2A to

KLCUL12A

12 - 18

10

KLCUL16A to

KLCUL55A

4 - 18

20

KLCUL80A

1 - 22

35

KLCUL110A to

KLCUL130A

2/0 - 6

120

KLCUL160A to

KLCUL200A

250 MCM - 6

275

KLCUL250A to

KLCUL300A

600 MCM - 4

Two: 250 MCM - 1/0

500

KLCUL360A

Two: 350 MCM - 4

275

KLCUL420A to

KLCUL600A

Two: 600 MCM - 2

500

KLCUL750A

Two: 800 MCM - 300

MCM

500

Advertising
This manual is related to the following products:

KLC