Thermalright HR-01 X - Manual

The Ultimate Cooling Solutions ! www.thermalright.com
HR-01 Xeon Heatsink
1
2
3
4
5
6
Parts Name Piece(s)
1
2
3
4
5
6
HR-01X Heatsink
Thermal Paste
Xeon Bracket Mount
Fan Wire Clip
Mini Wrench
Anti-vibration Strip 1
1
1
2
1
2
Installation
Component
Exploded View
Important! Before proceeding with installation, please check for the most up-to-date
instructions at www.thermalright.com
Fan Wire Clip
HR-01X Heatsink
Xeon Bracket Mount
Mini Wrench
Anti-vibration Strip
Step 1: Anti-vibration Strip
and Fan Wire Clip
Installation
Stick the anti-vibration strips to the fins
on each side of heatsink. Insert each
end of fan wire clips into the appropri-
ate holes on each side of the heatsink.
Step 2: Thermal Paste
Application
Apply a thin layer of thermal paste to
the bottom of heatsink and to the CPU.
Step 3: Xeon Mounting
Installation
Slide the Xeon bracket mount in
between the heatpipes and place it on
top of heatsink base with the dome part
in the socket. Then secure the heatsink
in place by using a screw driver or the
mini wrench (included) to tighten the
sprint loaded screws.
Step 4: Fan Installation
Place a 12 cm fan to the heatsink and
pull on the fan wire clips to hook into
the fan mounting holes on the fan.
Note:
The Xeon bracket mount can be
installed in two directions (in a 90
degree fashion). Please refer to
below illustration for Type 1 and Type
2 installation.