Changing default copy settings, Copy mode (type of original), Changing default copy settings -7 – Brother IntelliFAX 4100e User Manual

Page 101: Copy mode (type of original) -7

Advertising
background image

M A K I N G C O P I E S

11 - 7

Changing Default Copy Settings

Press Menu and 3 to change default settings for Copy mode. These settings will
remain until you change them again by pressing Menu. Adjust the Contrast and
Quality settings.

By pressing a number, you can adjust copy settings as shown in the following

chart. Press

or

to scroll through the options for each setting. Press Set to

save your selection. Press Stop/ExitOR—Press

to select the next setting

you want to change.

Press Menu, and 3.

Copy Mode (Type of Original)

You can select the Copy resolution for your type of original. The default setting
is

AUTO

, which is used for originals that contain both text and photographs.

TEXT

is used for originals containing only text.

PHOTO

is used for copying

photographs.

1

Press Menu, 3, 1.

2

Press

or

to choose the type of

original (

AUTO

,

TEXT

or

PHOTO

),

and then press Set.

3

Press Stop/Exit.

Note

If you have attached Cassette #2, be sure you turn it ON and setup the Paper
Size and Cassette Usage.
(See

Setting Paper Size

and

Turning on Cassette #2 (Option for FAX-4100 and FAX-

4750e)

.)

TEXT?

1.COPY MODE

2.CONTRAST

- +

is default

AUTO?

PHOTO?

1.CASSETTE #1

3.PAPER TYPE

2.CASSETTE #2

PLAIN

THIN

THICK

THICKER

1 . C O P Y M O D E

Advertising
This manual is related to the following products: