Brother IntelliFAX 4100e - Manual (Page 74)

6 - 10 S E T U P S E N D
Delayed Fax
During the day you can store up to 50 documents into memory for delayed
sending. Transmission of these documents will begin at the time of day you
enter in Step 3. If you have set up in Delayed Timer on page 6-9, you can accept
it in Step 3 or enter another time for this fax.
1
Place the original face down in the ADF.
2
Press Menu, 2, 2, 4.
3
Accept the displayed time or enter another
time for this fax, and then press Set.
4
Press 1 to leave the originals waiting in
the document feeder—OR—Press 2 to
scan the document into memory.
5
Press 1 if you want to select additional
settings. The LCD returns to the
SETUP SEND menu—OR—Press 2 if
you are finished choosing settings, and
then go to Step 6. The screen will prompt
you to enter the fax number.
6
Enter the fax number.
7
Press Fax Start. The machine will wait to send the fax at the time you set.
Delayed Batch Transmission
Before sending the delayed faxes, your Brother machine will economize by
sorting all the documents in memory by destination and scheduled time. All
delayed faxes scheduled at the same time to the same fax number will be sent as
one transmission.
1
Press Menu, 2, 2, 5.
2
Press or to select ON (or OFF ),
and then press Set.
3
Press Stop/Exit.
The number of documents you can scan into memory varies with the data they
contain.
4 . D E L A Y E D F A X
1 . D O C 2 . M E M O R Y
5 . B A T C H T X
B A T C H T X : O N ?
S E L E C T <- -> & S E T