7 auto dial numbers and dialing options, Storing numbers for easy dialing, Storing one touch dial numbers – Brother IntelliFAX 4100e User Manual

Page 76: Auto dial numbers and dialing options -1, Storing numbers for easy dialing -1, Storing one touch dial numbers -1, Auto dial numbers and dialing options

Advertising
background image

7 - 1

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S

7

7

Auto Dial Numbers and

Dialing Options

Storing Numbers for Easy Dialing

You can set up your machine to do three types of easy dialing: One Touch,
Speed Dial, and Groups for Broadcasting of faxes. You can store names with
these numbers for easy identification.

Storing One Touch Dial Numbers

You can store 32 fax/phone numbers that you can dial by
pressing one key (and Fax Start). To access numbers 17
to 32, hold down the Shift key. When you press a One
Touch dial location, the LCD shows the name or number
as the call is dialed. (See

One Touch Dialing

, Page 7-5.)

One Touch keys are the 16 keys (numbers 01–32) located on the left side of the control panel.

1

Press Menu, 2, 3, 1.

2

Press the One Touch key where you want
to store a number.
The LCD shows the location you selected.

3

Enter a number (up to 20 digits) and then press Set.
(See

Changing One Touch and Speed Dial Numbers

, Page 7-2.)

4

Use the dial pad to enter the name (up to 15
characters), and then press Set. You can use the
chart on Page 4-4 to help you enter letters—OR
Press Set to store the number without a name.

5

Return to Step 2 to store another One-Touch number—OR—Press Stop/Exit.
When you dial an auto dial number, the LCD shows the name you’ve stored, or
if you haven’t stored a name, the number you’re stored.

If you must wait for another dial tone at any point in the dialing sequence, store
a pause at that point in the number by pressing Redial/Pause. Each key press
adds a 3.5 second delay.

If you lose electrical power, auto dial numbers stored in memory will not be
lost.

(For USA only) One-Touch key 1 has been pre-programmed for the Brother
fax-back system.

If you want to enter a pause in the dialing sequence (for example, to access an outside
line), press Redial/Pause as you’re entering digits. A dash appears on the LCD,
pressing Redial/Pause enters a 3.5 second pause when the number is dialed.

1 . O N E - T O U C H D I A L

N A M E :
E N T E R & S E T K E Y

Advertising
This manual is related to the following products: