UVP DigiDoc-It Imaging System - Manual (Page 8)

DigiDoc-It Imaging System 7
4. To take images in color, ensure that the Color Capture box is checked.
5. Select Preview at the top of the software to preview the image.
6. While in preview mode, the Brightness slider can be adjusted to brighten dark images.
7. The user may adjust the focus manually to enhance the appearance of the previewed image. Click the
Manual focus radio button on the Preview window, then use the left and right arrows (shown in the red
box, below) to adjust the focus settings.
Preview Window with Manual Focus
8. When satisfied with the previewed image, select Capture at the top of the software.
Optional Camera Setup (Image Acquisition)
If operating the camera in automatic mode is not sufficient for the application, try utilizing the manual mode to
gain additional camera control.
1. Access the camera and turn the camera dial to M, the next position on the dial. (The dial is preset to A-
DEP and will only turn in one direction.)
Set camera to M