Weidmuller HS01 Heat Sink (Ultra SlimPak series) User Manual
Heat sink, model hs01, Ultra slimpak® series
Weidmuller Ltd.
10 Spy Court
Markham, ON L3R 5H6
Tel: (905)475-1507
Fax: (905)475-5855
Weidmuller Ltd
821 Southlake Blvd.
Richmond, VA 23236 U.S.A.
Tel: (804)794-2877
Fax: (804)794-0252
ISO 9001 Registered
Electronic Interface Modules
Heat Sink, Model HS01
Ultra SlimPak® Series
All Ultra SlimPak (USP) modules are designed and tested
to operate in ambient temperatures from 0 to 55°C,
when mounted on a horizontal rail (see Figure A) or with
approximately 1/2" between modules (see Figure B) to
allow adequate air circulation.
When five or more modules are mounted in close
proximity (see Figure C) or are mounted on a vertical rail
(see Figure D), circulating air or model HS01 Heat Sink is
recommended.
Figure A: Horizontal Rail Mount (recommended)
Figure B: Vertical Rail Mount (circulating air and 1/2” gap, >5 units)
Figure C: Vertical Rail Mount >5 units not recommended)
Figure D: Vertical Rail Mount (circulating air and
Model HS01 Heat Sink, >5 units)