Brother MFC-7225N - Manual (Page 16)

Configuring your network printer
2 - 4
2
Note
• If the print/scan server is set to its factory default settings without using a DHCP/BOOTP/RARP server,
the device will appear as APIPA in the BRAdmin Professional utility screen.
• You can find the node name and Ethernet address (Node Address above) by printing out the Network
Configuration Page. See Printing the Network Configuration Page on page 3-7 for information on how
to print the Network Configuration Page on your print/scan server.
4
Double-click the unconfigured device you want to configure.
5
Enter the IP address, Subnet Mask and Gateway (if needed) of your print/scan server.
6
Click OK.
7
With the correctly programmed IP address, you will see the Brother print/scan server in the device list.
Using other methods to configure your network printer
You can configure your network printer using other methods. See Other ways to set the IP address (for
advanced users and administrators) on page A-1.
Changing the print/scan server settings
Using the BRAdmin Professional utility and the TCP/IP protocol to change the
print/scan server settings (for Windows
® only)
1
Start the BRAdmin Professional utility (from Windows ® 98/98SE/Me, Windows NT ® 4.0 and Windows ®
2000/XP), by clicking Start / Programs / Brother Administrator Utilities / Brother BRAdmin
Professional Utilities / BRAdmin Professional.
2
Select TCP/IP in the left frame of the main BRAdmin window.
3
Select the print/scan server which you want to configure, in the right frame of the main BRAdmin window.
4
Select Configure print server from the Control menu.
5
Enter a password. The default Password is access .
6
You can now change the print/scan server settings.