Brother MFC-7225N - Manual (Page 54)

Appendix A
A - 7
A
Function Table and Default Factory Settings
*1: The factory setting for IP Address and Subnet Mask may be changed by the APIPA setting.
LEVEL
ONE
LEVEL
TWO
LEVEL THREE OPTIONS OPTIONS FACTORY SETTING
5.LAN 1.Setup
TCP/IP 1.BOOT Method Auto/ Static/ RARP/ BOOTP/ DHCP Auto
2.IP Address [000-255].[000-255].[000-255].[000-255] [169].[254].[001-254].
[000-255]
3.Subnet Mask [000-255].[000-255].[000-255].[000-255] 255.255.0.0
4.Gateway [000-255].[000-255].[000-255].[000-255] 000.000.000.000
5.Host Name BRN_XXXXXX=(last 6 figures of Ethernet
address)
(up to 15 characters)
BRN_XXXXXX BRN_XXXXXX
6.WINS Config Auto/ Static Auto
7.WINS Server (Primary)
[000-255].[000-255].[000-255].[000-255] (Secondary)
[000-255].[000-255].
[000-255].[000-255] 000.000.000.000
8.DNS Server (Primary)
[000-255].[000-255].[000-255].[000-255] (Secondary)
[000-255].[000-255].
[000-255].[000-255] 000.000.000.000
9.APIPA On/Off On
2. Setup
Misc. 1.Ethernet Auto/ 100B-FD/ 100B-HD/ 10B-FD/
10B-HD Auto
0.Factory
Reset -