Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 87)

Index
A
accessing parameters, 3-1
Adapter Port parameter (only for
SCANport products), B-3
application code, G-1
assigning name for WIM (optional)
using DriveExecutive, 3-23
using DriveExplorer, 3-14
using Pocket DriveExplorer for
Pocket PC, 3-8
attentions, 1-4
B
baud rate, see DF1 rate
BCC (Block Check Character), G-1
Bluetooth wireless technology, G-1
boot code, G-1
bus off, G-1
C
CAN (Controller Area Network), G-1
Clear DF1 Counts parameter
for DPI products, B-3
for SCANport products, B-4
clearing DF1 data, 4-6
clearing events, 4-5
Comm Flt Action parameter
for DPI products, B-2
for SCANport products, B-3
communications specifications, A-1
compatible products, 1-2, 1-3
components, 1-1
configuration tools for parameters,
3-1
ControlFLASH, G-1
CRC (Cyclic Redundancy Check),
G-1
D
Datalink Size parameter (only for DPI
products), B-2
DF1 Packets Rcvd parameter
for DPI products, B-3
for SCANport products, B-4
DF1 Packets Sent parameter
for DPI products, B-3
for SCANport products, B-4
DF1 protocol, G-2
DF1 rate, G-2
diagnostic items, 4-3
dimensions, A-1
DPI
compatible products, 1-2
definition, G-2
peripheral definition, G-2
product definition, G-2
DPI Data Rate parameter (only for
DPI products), B-2
DPI Port parameter (only for DPI
products), B-2
DriveExecutive
using to establish wireless
connection, 3-16
web site, see DriveTools SP
DriveExplorer
definition, G-2
free Lite version, G-2
using to establish wireless
connection, 3-10, 3-16
web site, G-2
drives, see DPI products