Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 9)

About This Manual P-3
The following conventions are used throughout this manual:
• Parameter names are shown in the format Parameter xx - [*]. The xx
represents the parameter number, and the * represents the parameter
name — for example Parameter 01 - [DPI Port].
• Menu commands are shown in bold type face and follow the format
Menu > Command. For example, if you read “Select File > Open,”
you should click the File menu and then click the Open command.
• The firmware release is displayed as FRN X.xxx. The “FRN”
signifies Firmware Release Number. The “X” is the major release
number. The “xxx” is the minor update number.
• Pocket DriveExplorer for Pocket PC (version 1.01), My Bluetooth
Places software (version 1.4.2), DriveExplorer Lite (version 4.04),
and DriveExecutive (version 3.01) were used for the screen pictures in
this manual. Different versions of the software may differ in
appearance and procedures.
• This manual provides information about the 20-WIM-N* Wireless
Interface Module (WIM) and using it with PowerFlex 7-Class drives.
The module can be used with other products that support DPI or
SCANport.
Since the WIM requires a Pocket PC, laptop PC or desktop PC equipped
with Bluetooth wireless technology, you may need to install a
third-party, vendor-specific Bluetooth driver. If this driver fails to
establish wireless communication with the WIM, refer to its
documentation for assistance. Furthermore, troubleshooting help may be
available on the vendor web site.
Conventions Used in This Manual
Third-Party Bluetooth Support