BRK electronic Carbon Monoxide Alarm C0250LBT User Manual

Monoxide, Co250lbt, Tamper proof bracket

Advertising
background image

C A R B O N
A L A R M

MONOXIDE

CAT.

CO250LBT

TAMPER PROOF

BRACKET

Locks alarm to wall to prevent removal

of alarm and battery. Includes tamper

proof screw and screwdriver bit.

ELECTROCHEMICAL

CO SENSOR

Most accurate technology available for

detecting carbon monoxide as com-

pared to other sensing technologies

TWO SILENCE

FEATURES

Silences low battery chirp for up to

eight hours or silence nuisance alarm

for several minutes.

END OF LIFE SIGNAL

Provides audible notice when alarm

needs to be replaced.

TAMPER RESISTANT

LOCKING PIN

Locks alarm cover to prevent removal

of battery. Perfect for apartment,

dormitory or hotel applications.

5 YEAR 9V LITHIUM

BATTERY INCLUDED

Description:

BRK Model CO250LBT is a single station carbon monoxide alarm specifically de-

signed for residential and institutional applications including sleeping rooms of

hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined

in standard NFPA 101. Model CO250LBT has been fully tested and complies with,

UL2034, NFPA 720, and NFPA 101 and other agencies that model their codes after

the above agencies. It meets building codes where battery operated carbon mon-

oxide alarms with silence and a 5-Year tamper proof mounting bracket is required.

BRK Model CO250LBT is a state of the art carbon monoxide alarm designed to

provide early warning of the presence of carbon monoxide. It features an electro-

chemical carbon monoxide sensor, an 85dB horn, a full function test switch and

a red LED light that indicates DC power or alarm. The CO250LBT features a 9V

Lithium battery that will power the alarm for at least 5 years. It also features a

tamper proof mounting bracket that prevents removal of the alarm from the wall or

ceiling using a tamper proof spanner screw. A tamper proof spanner screwdriver

bit is also included. It also features a tamper resistant locking pin that locks alarm

cover to prevent removal of battery when tamper proof bracket is removed. This

alarm has two silence features. Low Battery Silence: Temporarily silence the low

battery chirp for up to eight hours. Alarm Silence: Silence alarm for several min-

utes. Perfect for apartment, dormitory or hotel applications. The compact, low pro-

file design complements any décor. When voltage drops to a pre-set warning level,

the horn will “chirp” approximately once per minute to indicate a fresh battery is

needed. To insure the battery is always replaced properly, the cover is designed to

resist closing when the battery is missing. Designed

for wall or ceiling mounting.

9V Lithium

Battery Powered

7

CO

Advertising