Rockwell Automation 140U-xxx NFPA 79 Internal Rotary Operating Handle - Manual

Installation Instructions
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from
contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of
practice. In case of malfunction or damage, no attempts at repair should be made.
Operating Shaft Modification
C
C MIN with Bracket = 374 mm (12-3/4 in)
C MIN without Bracket = 239 mm (9-3/4 in)
Bulletin 140U NFPA 79 Internal Rotary Operating Handle Kit
(Cat 140U-H-_ _ _)
2
1
C -
147.6
(C
- 5-13/16)
3
(1/8)
6.35
(1/4)
Ш 3
(Ш 1/8)
3
mm
(in.)