Rockwell Automation 140G-Nx_NSx LSI Getting Started User Manual
Rockwell Automation Equipment
Advertising
ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
Installation Instructions for Bulletin 140U NFPA 79
Internal Rotary Operating NFPA Handle
(Cat 140U-J-NH12, -NH21)
Cut shaft to proper length
6.35 mm
(1/8 in)
3 mm
(1/8 in)
ø 3 mm
( ø 1/8 in)
Drill hole
D
D - 147.6 mm
D
MIN
with Bracket = 374 mm (12-3/4 in)
D
MIN
without Bracket = 239 mm (9-3/4 in)
(D - 5-13/16 in)
1
2
Advertising