Rockwell Automation 140M-C-TE1 Type E Adapter for 140M Motor Protection Circuit Breaker User Manual

Rockwell Automation Equipment

Advertising
background image

140M-C-TE1
140M-F-TE

IEC 60947
EN 60947
UL 508
CSA C22.2 No. 14

Installation instruction

Attention: To prevent electrical shock, disconnect from power source before
installing or servicing. Install in suitable enclosure. Keep free from contaminants.

Montageanleitung

Achtung: Vor Installations- oder Servicearbeiten Stromversorgung unterbrechen,
um Unfälle zu vermeiden. Die Geräte müssen in einem passenden Gehäuse
eingebaut und gegen Verschmutzung geschützt werden.

Instruction de montage

Attention: Avant le montage et la mise en service, couper l'alimentation secteur
afin d'éviter tout accident. Prévoir une mise en coffret ou armoire appropriée.
Protéger le produit contre les environnements agressifs.

Istruzione per il montaggio

Attenzione: Per prevenire infortuni, togliere tensione prima dell'installazione o
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.

Instruccion de montaje

Atención: Desconectar la alimentación eléctrica antes de realizar el montaje y la
puesta en servico, con el objeto de evitar accidentes. Instalado en una caja o
armario apropiado. Proteger el producto de los ambientes agresivos.

140M-C-TE1

140M-F-TE

1

2

9 mm 140M-C/-D

12 mm 140M-F

Nr. 2

T8

Md = 0,6 Nm max. (5,3 lb-in)

clic

clic

21.361.953-02 / 05. 2011

Copyright ©2011 Rockwell Automation. Technical changes reserved.

Edition 5

140M-C, 140M-D

(Ser B or later)

140M-F

(Ser B or later)

Advertising
This manual is related to the following products: