Rockwell Automation 1441-DYN25-Z Dynamix 2500 Data Collector User Manual
Dynamix 2500 data collector
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Dynamix 2500 Data Collector User Manual
- Summary of Changes
- Table of Contents
- Preface
- 1 - The Dynamix 2500 Data Collector
- 2 - Configuring the Dynamic 2500 Data Collector
- Apply Power to the Data Collector
- Installing the USB Drivers for the Data Collector
- Updating the Operating System
- Restarting the Data Collector
- Dynamix 2500 Data Collector Main Menu
- Dynamix 2500 Data Collector Setup Screen
- Dynamix 2500 Data Collector Data Collection Screen
- Setting Up the Dynamix 2500 Data Collector
- Using Memory Cards
- 3 - Setting Up Measurements
- Measurement Definition Options
- Setting Up Collection Specifications
- Edit the Measurement Definitions
- Measurement Input Types
- Measurement Window Types
- Measurement Signal Detection Types
- Measurement Maximum Frequencies
- Measurement Resolution
- Number and Type of Averages
- Order Normalization for Orders Track Spectrum
- Using Frequency Items for the Diagnostic Frequency Cursor
- Setting Up Speed References
- Unsupported Measurement Selections
- Setting Up Measurement Definitions
- Setting Up Alarms, Lists, and Inspection Codes
- 4 - Loading and Unloading
- Set Up Communication
- Loading Lists to the Data Collector
- Unloading Lists from the Data Collector
- Unload Lists in the Emonitor Software
- Unload Multiple Measurements Points in the Emonitor Software
- Unload Unscheduled (Offroute) Data from the Dynamix 2500 Data Collector
- Unload Measurements using Smart Unscheduled Mode
- Automatically Print Reports after Unloading
- Quickload Files
- Load a list to the Storage Card
- 5 - Collecting and Reviewing Data
- Preparing for Data Collection
- Collecting Route Data
- Select a Route
- Move through a List
- Start Data Collection
- Select Inspection Codes
- Manually Enter a Numeric Measurement
- Collect a Process DC Voltage Measurement
- Collect a Magnitude Measurement
- Collect a Spectrum Measurement
- Collect a Time Waveform Measurement
- Collect Magnitude and Phase Measurements at Orders
- Collect Multiple Measurements for a Point
- Collecting Offroute Data
- Storing Unscheduled Data
- Changing Display View
- Reviewing Data
- Capturing Screens
- 6 - Multi-channel Measurements
- 7 - Installing Optional Extension Modules
- Index
- Back cover