Rockwell Automation 1512B MV Controllers, 200/400A Two-High Cabinet, Standard and Arc-Resistant Enclosure User Manual
Rockwell Automation Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Medium Voltage Controllers, 200/400A Two-High Cabinet, Standard and Arc-Resistant Enclosure
- Summary of Changes
- Table of Contents
- 1 - General Information
- 2 - Installation – Standard Enclosure
- 3 - Installation – Arc-Resistant Enclosure (ArcShield)
- 4 - Common Installation
- 5 - Maintenance
- Tool Requirements
- Recommended Torque Values
- Door Interlock Circumvention
- Power Lock-out Procedure
- Fuse Removal and Replacement
- Contactor Maintenance
- Removing the Contactor
- Contactor Interlock Rod Adjustment
- Isolation Switch Mechanism Inspection and Lubrication
- Isolation Blade Switch Adjustment
- Isolation Switch Mechanism Grounding Adjustment
- Auxiliary Contacts Inspection and Replacement
- Isolation Switch Auxiliary Contacts
- Emergency Circumvention Procedure for Power Cell Entry
- 6 - Spare Parts
- A - ArcShield Unit Information
- B - ArcShield Plenum Installation Instructions
- Recommended Torque Values
- Plenum Bracing
- General Plenum Layout for ArcShield Line-up
- STEP 1 – Mounting a Single Plenum
- STEP 2 – Alignment of “Side- by-Side” Plenums
- STEP 3 – Sequence of Final Assembly
- STEP 4 – Closing the Front of the Plenum Sections
- STEP 5 – Extension and Elbow Assembly
- STEP 6 – Mounting Extension/Elbow to Plenum “Line-up”
- STEP 7 – Additional Mounting Support
- C - ArcShield Chimney Installation Instructions
- Back Cover