Rockwell Automation 1609 ENET - Manual

Installation Instructions
(Cat 1609-ENET)
Bulletin 1609 Network Management Card
ATTENTION: Please read and save these instructions. This manual contains important instructions for Bulletin 1609 Uninterruptible
Power Supply. Follow these instructions during the unpacking, installation and maintenance of the UPS. If you have a problem with
the UPS, please refer to this manual before calling Technical Services.
Contents for 1609-ENET Include:
• 1609 Network Management Card
• 1609-ENET Installation Instruction
• 1609-ENET Cover
• 2 Screws
• Cable
Installation
1. Loosen the 2 screws on 1609 UPS to remove the1609-ENET cover.
2. Insert the 1609-ENET card into the slot (This 1609-ENET Card is hot Swappable).
3. Place the 1609-ENET cover (provided with the EtherNet card) and screw the two screws in place
(torque
of 8.7+/-1.7 lb-in) .
Note: For detail of configuration, refer to the 1609 Network Management Card User Manual (1609-UM008).