Rockwell Automation 1326-CPC1T-L Special Application Cables - Manual

1 Publication 1326-IN030A-EN-P - May 2007
Installation Instructions
1326 Special Application Cables
Catalog Numbers 1326-CPB1T-L, 1326-CPC1T-L
About This Publication This document contains installation information for cables that have flying
leads. The flying leads allow the customer to determine the type of cable
terminations.
This table lists available 1326 special application cables and the cables they
obsolete.
This cable replaces this cable.
1326-CPB1T-L- xxx 1326-CPB1-xxx, 1326-CPB1-L-xxx, 1326-CPB1T-xxx
1326-CPC1T-L- xxx 1326-CPC1-xxx, 1326-CPC1-L-xxx, 1326-CPC1T-xxx
ATTENTION
DC bus capacitors on a drive retain hazardous voltages after
input power has been removed. Before beginning work on the
output power cable from any drive system, measure the bus
voltage at the drive to verify it has reached a safe level or wait
the full time interval as indicated in the warning on the front of
the drive. Failure to observe this precaution could result in
severe bodily injury or loss of life.
IMPORTANT
Do not coil a power cable on itself. Heat may buildup in a
closely coiled power cable and degradation of the cable
insulation may result.