Rockwell Automation 1426-COMM-DNT PowerMonitor 5000 Unit Optional Communication Modules User Manual

Installation instructions

Advertising
background image

Installation Instructions

PowerMonitor 5000 USB Driver Installation and

Configuration

Catalog Number 1426

The USB Device port can be used to set-up a temporary, point-to-point

connection between a personal computer and the PowerMonitor™ 5000 unit.

This connection is used for configuration, data monitoring, diagnostics, and

maintenance by using the unit's built-in web pages. The USB Device port is a

standard USB Mini-B receptacle. You need to install drivers to enable USB

communication.

To connect your personal computer to the PowerMonitor 5000 unit, use a

standard USB cable with a Type-A and Mini-B male plugs.

Topic

Page

Install Drivers

3

Configure the Connection

5

Browse the PowerMonitor 5000 Web Page by Using the USB Connection

7

Additional Resources

8

Advertising
This manual is related to the following products: