Rockwell Automation 1494F-N30_N60_N100_N200 (Series B) Fixed Depth Disconnect Switch (30A / 60A / 100A / 200A) User Manual

Rockwell Automation Equipment

Advertising
background image

Table of Contents

Page

Enclosure with Pre-Drilled Handle Cutout

2

-

Install Disconnect Switch

-

Install Disconnect Switch Standoffs

Enclosure without Pre-Drilled Handle Cutout

3

-

Locate Handle

-

Drill Handle Holes

Enclosure Requiring Door Catch Mounting Bracket

4

Fuse Block Adapter Plate Installation (Switch Rating 30A - 60A - 100A)

5, 6

Fuse Block Adapter Plate Installation (Switch Rating 200A)

7

Phase Barrier Replacement Kit and Fuse Clip Installation
(Switch Rating 30A - 60A)

8

Phase Barrier Replacement Kit and Fuse Clip Installation
(Switch Rating 100A)

9

Phase Barrier Replacement Kit (Switch Rating 200A)

10


Fuse Clip Installation (Switch Rating 200A)

11


Dimensions 12

Fuse Clip Installation (200A)

12

Installation--Vault Hardware Latching (1494F-L1)

13

Installation-- Vault Hardware Latching (1494F-L2, -L3, -L4)

14

Testing Vault Hardware Latching and Enclosure Seal

15

Installation-- Vault Hardware Latching (Non Pre-Drilled Enclosures)

16, 17

Bulletin 1494F Disconnect Switch Kits

18

Bulletin 1494F Disconnect Switch Kit Optional Accessory List

19

The following procedures are critical to the proper operation of the disconnect handle and switch.

Failure to follow these steps can result in damage to the equipment and/or serious injury or death to the

operator.

To prevent electrical shock, disconnect from power source before installing or servicing. Follow

NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.

Bulletin 1494F Fixed Depth Disconnect Switch Installation Instructions

(Cat 1494F-N30; -N60; -N100; -N200) (Series B)

WARNING

WARNING

42052-195-01
DIR 10000075001 (Version 00)

Printed in U.S.A.

Advertising