Rockwell Automation 1734-ADN POINT I/O DeviceNet Adapter Configuration Software Installation Instructions - Manual

Publication 1734-IN015A-EN-P - September 2000
Installation Instructions
POINT I/O DeviceNet Adapter
Configuration Software
(Cat. No. 1734-ADN)
Use this document to install:
•
RSLinx™, Version 2.20, Service Pack 1
•
RSNetWorx for DeviceNet™, Version 2.24.11
from the accompanying CD for use with the POINT I/O DeviceNet
adapter (1734-ADN).
Installing the Software
If your CD-ROM drive is enabled for Autoplay, follow these steps:
1. Insert the CD into the CD-ROM drive. The installation wizard
will launch automatically.
2. Follow the steps described in the installation wizard.
IMPORTANT
If you fail to use these software versions, you
cannot operate the 1734-ADN as designed.