Rockwell Automation 2361 Armature Heatpipe Assembly Repl. (T-Frame) User Manual
Armature heatpipe assembly replacement
R
EPLACEMENT
K
IT
I
NSTRUCTIONS
Armature Heatpipe Assembly
Replacement
(for 3000A 1395 Drives)
Contents
This document shows how to remove and replace an armature
heatpipe assembly in a 3000A 1395 DC drive.
What This Kit Contains
Using the table below, verify that you have received the appropriate
items in your kit:
Other Items Needed
Before you begin, be sure you also have the following:
•
Tools needed for:
•
Removing, tightening, and torquing nuts and bolts
(ratchet with extension, 9/16” socket, torque wrench for
25 lb-ft)
•
Loosening and tightening screws (slotted screwdriver)
•
Testing for voltage (multimeter)
•
Documentation:
•
Your drive system schematics
•
Publication 1395-5.40, Bulletin 1395 Digital DC Drive–
User Manual
•
Publication 2361-5.01, Bulletin 1395 Digital DC Drive in
Bulletin 2361 Motor Control Center for Drive Systems–
User Manual
For this part:
You should receive this quantity:
armature heatpipe assembly
1