Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 127)

Publication 2711P-UM001J-EN-P - November 2009 127
Windows CE .NET Operating System Chapter 5
Keyboard
The Keyboard dialog configures key settings for a keyboard that is
attached to the USB port of the PanelView Plus CE terminal. You can
adjust the:
•
rate for repeating a key press.
•
delay from the first key press to when repeating begins.
To adjust key repeat settings, check the Enable character repeat
checkbox. Adjust how often a key repeats by moving the slider
between Slow and Fast. To adjust the delay between key repeats,
move the slider between Long and Short. Tap the field at the bottom
of the dialog and then hold down a key to test the new settings.
When done performing operations, remember to click OK in the title
bar to activate settings.