Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 159)

Publication 2711P-UM001J-EN-P - November 2009 159
Install and Replace Components Chapter 6
4. Remove the four screws that secure the LCD display for all other
displays.
5. Lift the LCD display and detach the display connector from the
circuit board.
The circuit board layout may vary for each terminal model.
The location of the connector varies by model.
6. Detach the backlight connectors from the circuit board.
The 1250 has one or two backlight connectors depending on the
series of the display. The 1500 has four backlight connectors.
Display
Connector
Backlight
Connector
1250 1500