Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 195)

Publication 2711P-UM001J-EN-P - November 2009 195
Upgrade Firmware Chapter 8
3. From the Firmware source folder list, select the location of the
firmware files.
The default location is C:\Program Files\Rockwell
Software\RSView Enterprise\FUPs.
4. From the Upgrade firmware version list, select the version of the
firmware you want to upgrade to, then press Next.
5. Select the appropriate KEPServer drivers and press Next.
If no KEPServer drivers are needed, just press Next.
TIP
If the selected FUP file does not support the KEPServer
drivers, this dialog box will not appear.