Click finish to start the upgrade, Click yes to continue the upgrade process – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 202
Advertising
202
Publication 2711P-UM001J-EN-P - November 2009
Chapter 8 Upgrade Firmware
11. Click Finish to start the upgrade.
12. Click Yes to continue the upgrade process.
If the terminal was properly prepared for the upgrade, no
applications should be running.
Firmware files are downloaded to the terminal. This may take
several minutes to 15 minutes.
13. When the download is complete, click OK to reset the terminal.
If other terminals exist on the same Ethernet network, the
following error may display:
Error registering name on network (may be duplicate). Change
in system Control Panel and try again.
Advertising