External compactflash card, Restart the panelview plus ce terminal – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual

Page 206

Advertising
background image

206

Publication 2711P-UM001J-EN-P - November 2009

Chapter 8 Upgrade Firmware

External CompactFlash Card

When the new operating system is running, load the PanelView Plus
CE components as follows.

1. Open the PanelView Plus CE Install Utility folder on the

PanelView Plus CE Accessory CD and copy the following to an
FAT formatted CompactFlash card:

InstallFromStorageCard.exe

pvplusceinstall.ini

Storage Card File folder

2. Insert the CompactFlash card into the external card slot on the

terminal.

3. Using Windows Explorer, browse the \Storage Card folder and

run InstallFromStorageCard.exe.

4. Select the desired components from the list of available

components.

Use the >> button to install everything.
Once installed, components can be optionally removed to free
space in the \Storage Card folder.

5. When satisfied with the selections, click Install/Remove.

When the operation is complete, you will see a message box
reporting the number of files installed (or removed).

6. Restart the PanelView Plus CE terminal.

Advertising