Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 93)

Publication 2711P-UM001J-EN-P - November 2009 93
Configuration Mode Chapter 4
Configure Startup Options FactoryTalk View ME Station software starts based on shortcuts in the
Windows startup folder and whether an application is loaded. You
can modify the action the terminal takes on startup.
•
Disable FactoryTalk View ME Station software
•
Go to FactoryTalk View Configure mode
•
Run the current application
Disable FactoryTalk View ME Station Software on Startup
1. Select Terminal Settings>Startup Options>FactoryTalk View ME
Station Startup.
2. Press the On Startup button until Do not start FactoryTalk View
ME is selected.
3. Press OK.