Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 116)

116 Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Appendix B Accessories Installation
PCI/PCIe Riser Board Options
You can use the PCI/PCIe expansion slot kit, catalog number 6189V-EXTPCI2,
to change the default one-slot PCI/PCIe riser board to the following:
• Two-slot PCI riser board
• Two-slot PCIe x4 riser board
• Two-slot riser board with one PCI slot and one PCIe x4 slot
Figure 19 - PCI/PCIe Riser Board Options
Follow these steps to install the PCI/PCIe expansion slot kit (the display
computer is shown).
1. Follow the steps for
Pre-configuration on page 44 .
2. Remove the computer cover as detailed in
Remove the Cover on page 45 .
3. Remove the three screws that secure the default PCIe x8 riser board
bracket (A).
Item Component
1 Motherboard connector
2 PCI expansion slot
3 PCIe x4 expansion slot
SHOCK HAZARD: Electrostatic discharge (ESD) can damage the computer and
components. Read and follow
Electrostatic Discharge Precautions on page 44
before removing the rear cover.
Failure to follow proper safety precautions could result in severe electrical shock or
damage to the computer.
One-slot PCI Riser Kit,
Cat. No. 6189V-PCIR
Alternate Two-slot PCI/PCIe Extender Kit, Cat. No. 6189V-EXTPCI2
1
2
1
3 2 2
1 1
2 3
3